How to Install New Kitchen Cabinets. Installing new kitchen cabinets is a major project. It can be stressful, so it’s important to know what you’re getting into. That’s why we’ve created this helpful guide on how to install new kitchen cabinets. You’ll learn everything from the tools you’ll need, to how to measure and cut the cabinet boards, and even where to find design inspiration for your own kitchen cabinet makeover. Learn about the process of installing new kitchen cabinets now!
Tools you’ll Need to Install New Kitchen Cabinets
The first step to installing new kitchen cabinets is gathering the tools you’ll need. You’ll need a saw and a drill, as well as screws, wood glue, and painter’s tape.
For cutting boards: Tape off the area on your floor where you will be working. Next, measure the desired height of your kitchen cabinet, then use a straight edge to mark it on the board. After that, cut along the marked line using your saw. If you have an uneven edge, trim it down with a handsaw or jigsaw before applying any glue or paint. Next, put some wood glue into the space where the two boards meet and clamp them together for at least an hour to make sure they are securely glued together. For tips on how to install new kitchen cabinets without nails simply follow this link!
Measure and cut Cabinet Boards
After you have your cabinet doors and drawer fronts in hand, it’s time to start cutting the boards. For this step, measure and cut the board down to the sizes needed. If you’re using a table saw, measure off the measurements on the boards and use a straight edge to cut through the board with a circular saw or jigsaw. If you have a miter saw, then all you’ll need is one simple measurement at each corner of your boards.
Cutting cabinet boards
Some people might be intimidated by cutting their own cabinet boards because it’s an unfamiliar process. But don’t worry! Once you get the hang of it, it’ll become second nature for your next DIY project.
Install the Base Cabinets
If you’re installing new kitchen cabinets, you’ll first need to measure the base cabinets. Measure the cabinet height and width. Make sure that you have the measurements of both the left and right sides of your base cabinets. This will help you to determine where your wall studs are located so that you can correctly place your new kitchen cabinets.
The next step is to determine whether or not your base cabinet will be flush with your walls or stick out from them. If it is going to stick out from the wall, you’ll need to install a backer board behind it. Secondly, if it’s flush with the wall, there isn’t a backer board needed.
Now that your base cabinets are installed, it’s time to measure for and cut boards for installation on the tops of your base cabinets. These boards will be mounted on top of the second row of boards in order to create a level surface for all subsequent cabinetry – this process is called “capping.” You’ll want to make sure that these boards are at least 2″ wider than any other trim pieces in order to cover any imperfections between two boards when capping them together.
Next, use plywood as shelving inside your lower cabinetry or pantry area by using metal brackets or mounting screws through each panel into a stud in order to create stability and provide an appropriate surface for storing items like canned goods and cleaning supplies.
See More: Cheap Sectional Sofas Under $500 Buyer’s Guide and Reviews
Hang the Upper Cabinets
After assembling all of your cabinets, it’s important to hang the upper cabinets before you start on the lower ones. This is because the upper cabinets will be more difficult to install when they’re lying on their side.
Start by using a stud finder to locate the wall studs in your wall, and then use a level to mark where you want the tops of each cabinet hung. You can use masking tape to mark off where you’ll need to make a cut in order to get each cabinet into position.
To hang an upper cabinet, make a cut in the drywall at the top of one of the marks made with tape and then insert a screwdriver through this hole and into one of the studs behind it. You can now hang one end of the cabinet onto this screwdriver – make sure that you are using your level so that everything is straight! Repeat this process for each of your cabinets, until they are all hanging securely from their screws.
Install Drawers
After you’ve installed the cabinet boards, it’s time to install the drawers. You want to use drawer slides that are sized to match the size of the drawer opening. For example, if your drawer opening is 27-1/4 inches wide and 18-3/4 inches tall, then you’ll need a set of bagged slides in which each slide is 27-1/2 inches wide and 18-7/8 inches tall. The width on these slides should match the width of your board and the height should match the height of your board.
If you’re using a plywood board (which is what most people use), then you’ll want to make a template for each side of your drawer opening before you start installing them. This will help ensure that they are perfectly spaced and square so your drawers will close properly.
Kitchen Cabinet Installation
There are a few essential tools that you’ll need before installing new kitchen cabinets. You’ll need: -a tape measure-a straight edge for cutting boards, like a yardstick or a piece of plywood-sheetrock knife-hammer-pry bar
Design Inspiration for Your Own Kitchen Cabinets
If you’re not sure where to start, the first step is deciding what style of design you want for your kitchen. If you have an idea in mind, then it will be easier to take the necessary measurements and choose the appropriate cabinets and materials. Looking for inspiration? Check out these kitchen design ideas:
- Open-shelf backsplash: This look is great because it can also double as a handy spot to store your pots and pans while they wait to head into the oven or onto the stovetop.
- Minimalist cabinet color: Going with a lighter color on your cabinets can make all of your food pop when you put it on display. You’ll be able to showcase all of your recipes without worrying that they’ll lose their appeal against darker cabinetry.
- Solid wood doors: If you’re looking for richness and warmth, this type of door offers both qualities. If you want that traditional look, then a solid wood door is a great choice.
- Lazy Susan cabinet: A lazy susan cabinet is perfect for those who love being organized with their spices and oils. It’s also great for providing space in cramped kitchens since it allows storage below the countertops instead of taking up valuable vertical space within cabinets or pantries.
Install the Cabinet DoorsInstall the Cabinet Doors
There are many ways to install cabinet doors, but these two methods are the most popular. First, attach the hinges to the cabinet face frame. Then, measure from the top of each hinge on the inside edge and mark where you want to install a screw or nail. On each side of this screw or nail mark, drill a hole large enough for your hardware. Now you can use a screwdriver to attach your door hardware. The second method is just like the above except you would use a dowel instead of a nail or screw to attach your door hardware.
Add a Finish to the Cabinets
After you install your new cabinets, you’ll want to add a finish to them. You can either go with a light or dark stain. If you choose the lighter option, consider using a paint that has a little bit of sheen to it so your cabinets will shine. If you prefer dark cabinets and the look of black hardware, you can use oil-based paint with a flat finish for all of your cabinets. Either way, adding a finish is the perfect finishing touch to your kitchen renovation!
Conclusion
Hand installing new cabinets is a complex task, but with the right set of tools and a little know-how, you can install your own kitchen cabinets. There are many different types of cabinets you can choose from, so be sure to measure your kitchen space and use your creativity to design the kitchen of your dreams! If you like working with your hands and want to save money, installing new kitchen cabinets is a great DIY project.