How to Add Glass to Kitchen Cabinets

How to Add Glass to Kitchen Cabinets

There are many reasons to consider adding glass to your kitchen cabinets. First, they offer a chance for transparency and visual connection with the outdoors. They also provide additional natural light in the kitchen, which can not only reduce your utility bills but also boost your mood. But don’t jump into this project without doing some research on your own first. Here are some tips on how to get started with this project at home.

Design Your Glass Cabinet

The first step in adding glass to kitchen cabinets is designing the cabinets. First, measure your cabinetry and decide how many glass panels you’re going to need. Then, buy a sheet of tempered glass that will fit your cabinet dimensions. Next, cut the tempered glass with a diamond blade saw or contact paper cutter. Finally, install the tempered glass into the cabinet door frame using silicone sealant and clear silicone glue.

How to Install Glass Cabinet Doors

Installing glass cabinet doors is a home improvement project you can do yourself. It does require some patience but isn’t too difficult of a DIY project. You will need to remove the existing doors from your cabinets, then measure and cut the glass to size. You’ll also need to install new door tracks on the inside of your cabinet walls. Measure the height and width of your doors and cut each piece of glass to fit (ensure that you leave about 1/4 inch around each side for clearance).

Then, clean your cabinets with water and dish soap, dry them thoroughly with a clean towel, and use masking tape to mark where you’ll be cutting openings for the door handles (these should mirror one another). Finally, use a jigsaw to cut out holes for handles in the front edge of each door panel (you want these holes as close together as possible), and attach felt pads or rubber bumpers to the backsides of all panels so they don’t damage your cabinets.

Tips on Choosing the Right Glass

You can decide to use regular glass or mirrored glass. The type of glass you choose will depend on what you are trying to accomplish with the project. If you want to have a more open and airy kitchen, you might want to stick with regular glass because it allows for more visibility. On the other hand, if you want your kitchen cabinets to have a more reflective and glamorous feel, then mirrored glass would probably be better.

The Benefits of Incorporating Glass in your Kitchen

First and foremost, glass in your kitchen can provide a sense of transparency. This is good because it creates a connection to the outdoors and allows you to feel more connected with the natural environment around you. Secondly, glass in your kitchen provides extra light. This is especially important if you live in a dark apartment or house. It can also reduce your utility bills by adding more light and reducing the amount of electricity needed for artificial light.

Choose an area with plenty of natural light. Remember that the more sunlight that’s streaming into your home, the better!

Look for tempered glass for safety purposes as tempered glass won’t shatter into sharp pieces when it breaks.

Be sure to measure out how much space will be needed for each panel before cutting it from the sheet pan so that they fit perfectly within the cabinet doors or drawers they’ll be installed into.

See More: Best Slipcovered Sofas Review In 2022

How to Clean your new Glass Panels

It’s important to clean your new glass panels. There are many ways to do so, but the best option is a mixture of water and vinegar or lemon juice. Use a paper towel or cloth to wipe down the glass panels and rinse off any excess liquid with a dry cloth. You don’t want to use any chemicals because they could leave streaks.

Preparing the Glass for Installation

Before you can begin the installation process, you will need to clean the surface of your cabinets. This will remove dust particles and any residue from the previous cabinet finish that remains. You’ll also need to measure the width or depth of your cabinet opening and purchase a sheet of clear glass that is just slightly larger in size.

If you choose to cut it yourself, be sure to use protective eyewear as well as appropriate cutting tools for this job. It’s also important to remember that each side shard should have a bead of silicone caulk on each side so that they seal properly when installed.

Why I Chose Glass for my Cabinets

I chose glass for my kitchen cabinets because I wanted a way to see outside. In addition to a visual connection, the natural light coming in through the glass made the space brighter and more energizing. The only downside was that it required cleaning more often than the other options available. That’s because the surface of the glass is less resilient than wood and can show fingerprints, dirt, or droplets of water.

What you Need to Know Before you Start

The most important thing to do before you get started is to measure your cabinets. You want the glass to fit inside the doors without coming loose or falling out, so it’s important to know what size you need before you start. If you have a rectangular cabinet, for instance, you could either purchase a panel that fits the entire width of the door or buy two panels and place them on either side of the door.

How to Install Glass Panels

If you want to install glass panels in your kitchen cabinets, there are a few things to consider first. When it comes to installation, there are two different ways to go about it. You can either attach the glass to your cabinet doors themselves or you can attach the glass on top of them. The best way is often dependent on the type of cabinet door and how the panels will be applied.

When attaching the glass directly to your cabinet doors, make sure that the glass is installed from the inside out. This will make for an easy installation process that won’t take up too much space in your kitchen. If you want to add more depth and visual appeal but don’t have a lot of space, consider installing a frosted panel on top of your doors instead. It doesn’t take up any additional room but still offers all of the benefits like natural light and transparency.


Glass is a beautiful material that is perfect for kitchens. It’s great for those who want to design a modern feel or those who want a more natural feel. It’s also perfect for those who want their kitchen cabinets to be more visible, which is easy to do with glass.

But installing glass can be a little tricky — it needs to be installed correctly and with the right materials. I’ve outlined everything you need to know before installing your glass panels, along with all the steps you need to take, and tips to keep in mind. I hope this post has been helpful!

Scroll to Top