Exactly how to Remove a No-Screw Restroom Light Fixture

All of us like a flush light in the shower room–.


Well … we do until the light bulb blows in our expensive fixture on a dark wintertime evening. That makes us go right off it. And also when it comes to the user’s manual that describes exactly how to dismantle it. We’re aware that by now that guidebook has either changed right into the youngsters’ 3rd-grade paper Mache task or, has decayed right into a pulp at the city dump.


It’s just at times like these that we desire we ‘d opted for the dead very easy screw-in light fixture at the homeware shop that was half the cost. But do not despair, what’s coming up is a list of actions that will help you to take down any light fixture without any screws.

To get going, take a look at your lighting fixture as well as decide which classification it comes under:

  • – Notch or Groove System.
  • – Spring-Loaded Mechanism.
  • – Slotted Connectors.
  • – Flush Mount.

As soon as you have a much better suggestion of that your opponent is, it’ll be a whole lot much easier for you to tackle them. Have a look at the section in this write-up that represents your light fixture.

See More: How to Soundproof a Bedroom Door



Notch or Groove Mechanism.


This type of component will have the dome protected onto the base using a notch or groove system.
This system is ideal gotten rid of with two people. Once you have actually buddied up, you can get started.


Here’s exactly how:


1. Individual A should tax the base pressing it in the direction of the ceiling/wall.


2. Individual B must twist the dome to ensure that it detaches itself from the base.


3. As soon as removed, the fixture should dismantle with ease.
If you don’t get it the first time, try once again as the notch in the dome may be twisted away from the groove. So maintain pressing the base up and turning the dome till you locate the groove. Once it has actually removed itself from the groove it will certainly fall away from the base.


Dead very easy right? The bright side is that placing it back with each other is equally as easy.

Right here’s exactly how:


1. Individual A need to press the base against the ceiling/wall.


2. Individual B need to turn the dome right into the base till it slots into the groove.


3. As soon as slotted in, both parties can lift their hands far from the fixture.

Spring-Loaded System.


This type of fixture will certainly have the base and also the dome pushed firmly together making use of limited springs.
Bellow’s exactly how to remove this sort of lighting fixture:


1. Tease a flathead screwdriver or a knife between the base of the light fixture as well as the wall/ceiling.
2. Relocate the device backwards and forwards till there is a big enough space for you to get your fingers in between the base as well as the wall/ceiling.


3. Draw the fixture off of the springs with your hands.
Bellow’s something useful concerning light fixtures with spring-loaded systems. They have actually been made to pull away from the wall surface and hold themselves in place as you change the bulb. (They resemble the light fixture version of hands-free driving.).
After that to place the fixture back together you simply press it up in the direction of the base. With a little handling, it needs to click back right into location.


Currently, what If you’re bothered with not being able to get the fixture back together again? Even if you only eliminate the dome from one side, you will still have adequate functioning space around the bulb. Getting rid of the dome on one side just makes it easier to snap whatever back right into place when you’re done.


Some spring-loaded fixtures have been built with a stress mechanism. This fixture will certainly divide the base from the dome when pressure is placed on the base. The pressure will certainly move the springtime’s to agreement and also the dome will certainly relieve away.

See More: How to Remove Bathroom Light Fixture Cover

Slotted Connectors


This sort of light will have raised bumps that secure the base to the dome.

Here’s how to remove this sort of light feature:


Twist the dome to take it out of line with the bumps.
Delicately take down as well as the fixture should come away in your hands.

Right here’s just how to place it back together:

Find the increased bumps and line them up with the groves in the dome.
Tease the dome by turning it against the base so the slotted connectors form. As soon as safeguarded, you can let go of the component.


Flush Mount


This kind of light fixture has its base set flush versus the ceiling or wall surface.

Right here’s exactly how to eliminate this kind of light attribute:


Locate the finial (the fancy decorative bit in the middle of the dome).
Transform the finial anticlockwise to loosen it. Maintain one hand on the dome. As you turn the finial the dome ought to begin to find far from the base.


Totally loosen the finial and the dome needs to come away in your hand.

Scroll to Top